CNC Factory
-
4021 W Chandler Ave
Santa Ana, CA 92704 - 714-581-5999
Hours
Chamber Rating
-
Brant Landes
We currently have the sidewinder with a 5x10 table. Overall it's a solid machine and it serves our purpose well. That's the positive! When it comes to service they don't have such a thing once they are done with the initial hookup they will never give any further service. We have been trying to get them out to fix a number of different issues with some of the issues being there from day one. It's been 2 years and they keep saying they're coming but it's not happened yet! At the end of the day they have a nice machine but no customer service.
Oct 10th, 2023 -
Blake Shafer
We purchased a Python XPR and have had an overall positive experience with the machine itself. However, I believe they've gotten more popular than they are productive. Getting support on your machine is a terrible experience and good luck if you need to get a technician out, because that will likely never happen. This rating will be updated if conditions change.
Aug 1st, 2023 -
Bryan Erlanger
We have several of their machines and for the most part they work as expected. They are about 19 months old and occasionally something comes up that we need support on. The turn around on support has been getting slower and slower. At the time of posting this review I am still waiting on a resolution for an issue raised 10 business days ago.
Jul 27th, 2023 -
Jade Maxwell
CNC factory was extremely helpful in the design, plan and production of my projects.
Mar 24th, 2022 -
Aubrey Nettrour
I have had their machine for the past year, it has been a huge blessing for us. The previous machine was a 'FORD', fix or repair daily machine. This machine just works and does what we need. It is mechanical, and does have parts that under normal operation can fail such as bearings and or sensors. In our case we have only had 1 part go bad which was a sensor indicating tool holder position. We do have a couple of bearing blocks that show signs of needing replaced upcoming but those I consider as a wear item. I gave 5 stars, but they or the machine is not perfect. We at Top Quality Cabinets are not perfect, we are all human. My largest complaint on the machine so far would be tech support responsiveness. They are quick to always answer their phone, which I like a lot, and I am calling someone from this country. The machine cuts faster, much faster than our old CNC which was a Shopsabre. Our new machine is a 5 by 10, which at first I did not want but was talked into. So far this past year, twice I have had to cut 5 by 5 baltic birch for flat nested dovetail drawers as 4 by 8 baltic was out of stock. Glad now I went with the 5 by 10. I believe the machine has nearly all paid me back for itself easily in the past 12 months. We used to buy all of our doors for our new construction homes, at around 3k to 6k per job. The market has gone nearly 100% paint grade, and after buying the CNC, I priced stain grade much higher to accommodate having to buy a shaper cut door. Our HDF 3/4" cost us about 50.00 per sheet, or 1.56 SF. We are a small shop, but do about 20 to 25 jobs per year. So being able to cut our paint grade shaker doors out of HDF has been awesome. Just today I purchased 72 sheets of 3/4 HDF for several upcoming jobs on schedule. At 3600.00 plus sales tax, we are certainly money ahead on these sheets. Especially when that cost of 3600.00 barely covered our door expense on 1 job in the past. I am happy for CNC Factory, and happy that they sold me their CNC. I do hope we can eventually get a quicker response on Tech support.
Nov 20th, 2021
Contact Info
- 714-581-5999
Questions & Answers
Q What is the phone number for CNC Factory?
A The phone number for CNC Factory is: 714-581-5999.
Q Where is CNC Factory located?
A CNC Factory is located at 4021 W Chandler Ave, Santa Ana, CA 92704
Q What is the internet address for CNC Factory?
A The website (URL) for CNC Factory is: https://cncfactory.com/
Q How big is CNC Factory?
A CNC Factory employs approximately 20+ people.
Q What days are CNC Factory open?
A CNC Factory is open:
Wednesday: 8:00 AM - 5:00 PM
Thursday: 8:00 AM - 5:00 PM
Friday: 8:00 AM - 5:00 PM
Saturday: Closed
Sunday: Closed
Monday: 8:00 AM - 5:00 PM
Tuesday: 8:00 AM - 5:00 PM
Q How is CNC Factory rated?
A CNC Factory has a 3.4 Star Rating from 15 reviewers.
Hours
Related Categories
Ratings and Reviews
CNC Factory
Overall Rating
Overall Rating
( 15 Reviews )Brant Landes on Google
We currently have the sidewinder with a 5x10 table. Overall it's a solid machine and it serves our purpose well. That's the positive! When it comes to service they don't have such a thing once they are done with the initial hookup they will never give any further service. We have been trying to get them out to fix a number of different issues with some of the issues being there from day one. It's been 2 years and they keep saying they're coming but it's not happened yet!
At the end of the day they have a nice machine but no customer service.
Blake Shafer on Google
We purchased a Python XPR and have had an overall positive experience with the machine itself. However, I believe they've gotten more popular than they are productive. Getting support on your machine is a terrible experience and good luck if you need to get a technician out, because that will likely never happen. This rating will be updated if conditions change.
Bryan Erlanger on Google
We have several of their machines and for the most part they work as expected. They are about 19 months old and occasionally something comes up that we need support on. The turn around on support has been getting slower and slower. At the time of posting this review I am still waiting on a resolution for an issue raised 10 business days ago.
Jade Maxwell on Google
CNC factory was extremely helpful in the design, plan and production of my projects.
Aubrey Nettrour on Google
I have had their machine for the past year, it has been a huge blessing for us. The previous machine was a 'FORD', fix or repair daily machine. This machine just works and does what we need. It is mechanical, and does have parts that under normal operation can fail such as bearings and or sensors. In our case we have only had 1 part go bad which was a sensor indicating tool holder position. We do have a couple of bearing blocks that show signs of needing replaced upcoming but those I consider as a wear item. I gave 5 stars, but they or the machine is not perfect. We at Top Quality Cabinets are not perfect, we are all human. My largest complaint on the machine so far would be tech support responsiveness. They are quick to always answer their phone, which I like a lot, and I am calling someone from this country. The machine cuts faster, much faster than our old CNC which was a Shopsabre. Our new machine is a 5 by 10, which at first I did not want but was talked into. So far this past year, twice I have had to cut 5 by 5 baltic birch for flat nested dovetail drawers as 4 by 8 baltic was out of stock. Glad now I went with the 5 by 10. I believe the machine has nearly all paid me back for itself easily in the past 12 months. We used to buy all of our doors for our new construction homes, at around 3k to 6k per job. The market has gone nearly 100% paint grade, and after buying the CNC, I priced stain grade much higher to accommodate having to buy a shaper cut door. Our HDF 3/4" cost us about 50.00 per sheet, or 1.56 SF. We are a small shop, but do about 20 to 25 jobs per year. So being able to cut our paint grade shaker doors out of HDF has been awesome. Just today I purchased 72 sheets of 3/4 HDF for several upcoming jobs on schedule. At 3600.00 plus sales tax, we are certainly money ahead on these sheets. Especially when that cost of 3600.00 barely covered our door expense on 1 job in the past. I am happy for CNC Factory, and happy that they sold me their CNC. I do hope we can eventually get a quicker response on Tech support.
Overall Rating
Overall Rating
( 15 Reviews )Write a Review
Industrial Equipment Supplier Near Me in Santa Ana, CA
Delta-Phase Electronics Inc.
Santa Ana, CA 92705
714-866-8070 ( 0 Reviews )
Assembly House, Inc
Santa Ana, CA 92705
714-768-7614 ( 0 Reviews )
Applied Industrial Technologies
Santa Ana, CA 92707
714-436-1330 ( 1 Reviews )
California Tool and Welding Supply
Santa Ana, CA 92701
714-836-7327 ( 121 Reviews )
Ultimate Bars
Santa Ana, CA 92707
714-849-1340 ( 7 Reviews )
CAPTURE 3D
Santa Ana, CA 92704
(714) 546-7278 ( 4 Reviews )
Independent Thermal Solutions - Tempco Temperature Controllers, Industrial Heaters, Band Heaters, Thermocouples, Cartridge, Immersion Heaters
Santa Ana, CA 92707
(714) 979-9544 ( 2 Reviews )
Fastener Express, Inc.
Santa Ana, CA 92705
714-238-0016 ( 13 Reviews )